33 55 Anti-roll bar
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bracket, anti-roll bar to rear axle support | F01/F02/F03/F04/F07/F06/F10/F11/F12/F13/F18 | M10 | Replace screws. | 56 Nm |
| F25/F26 | M8 | Replace screw. | 34 Nm | |
| 2AZ Anti-roll bar link to anti-roll bar/swinging arm | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 | Replace nuts. | 56 Nm |
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. Jointing torque Angle of rotation |
45 Nm 45 ° |
|
| 3AZ Vibration absorber to anti-roll bar bracket | F01/F02/F06/F07/F10/F11/F12 | Replace screw. | 19 Nm | |
| 4AZ Anti-roll bar link to wheel carrier | F25/F26 | M10 | Replace screw. | 56 Nm |