61 31 231 Removing and installing/replacing steering wheel module control unit

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

NOTE: Steering wheel cover is shown removed for purposes of clarity.

Remove control unit for steering wheel module (1) from steering wheel (2) in direction of arrow.

Fig 1: Removing Steering Wheel Module Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove steering wheel electronics control unit (2).

Installation note:

Make sure electronic steering wheel module (2) is fitted correctly.

Fig 2: Identifying Plug Connection And Steering Wheel Electronics Control Unit

Courtesy of BMW OF NORTH AMERICA, INC.