28-1 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 BMW M6 Gran Coupe, 2018 BMW M6 Gran Coupe, 2017 BMW M6 Gran Coupe, 2016 BMW M6 Gran Coupe, and 2015 BMW M6 Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Dual clutch transmission to engine (see TRANSMISSION DESIGNATIONS ). | ||||
| Steel Torx screw | GS7D36SG | M8x50 | 19 Nm | |
| GS7D36SG | M10 | 38 Nm | ||
| GS7D36SG | M12 | 66 Nm | ||
| Aluminium screws/bolts are not magnetic N54/N55 | GS7D36SG | Replace screws Jointing torque and angle of rotation must be observed without fail |
||
| GS7D36SG | M12 | Jointing torque | 25 Nm | |
| Angle of rotation | 130 ° | |||
| Aluminium screws/bolts are not magnetic S55 | GS7D36SG | M8 | Jointing torque | 8 Nm |
| Angle of rotation | 90 ° | |||
| 2AZ Oil filler plug | GS7D36SG | Replace screw | 25±3 Nm | |
| 3AZ Oil drain plug | GS7D36SG | Replace screw | 8 Nm | |
| 4AZ Transmission oil sump | GS7D36SG | 10±1 Nm | ||
| 5AZ Nut, sealing cap for oil filler neck | GS7D36SG | Replace gasket | 25 Nm | |
| 6AZ Banjo bolt for oil filler neck | GS7D36SG | Replace seals | 40 Nm | |
| 7AZ Parking lock module | GS7D36SG | M6 | 8 Nm | |
| 8AZ Heat shield, twin-clutch gearbox connector at transmission | GS7D36SG M6 | 8 Nm |