28-1 60 Mechatronics control unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 BMW M6 Gran Coupe, 2018 BMW M6 Gran Coupe, 2017 BMW M6 Gran Coupe, 2016 BMW M6 Gran Coupe, and 2015 BMW M6 Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - MECHATRONICS CONTROL UNIT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hydraulic cover to transmission | GS7D36SG M6 | 10 Nm | ||
| 2AZ Mechatronics to transmission | GS7D36SG | M5x30 | Jointing torque Torque angle |
3 Nm +50 ° |
| M5X35 | Jointing torque | 3 Nm | ||
| Torque angle | +50 ° | |||
| M5X50 | Jointing torque | 3 Nm | ||
| Torque angle | +50 ° | |||
| M5X75 | Jointing torque | 3 Nm | ||
| Torque angle | +90 ° |