28-1 10 Housing with add-on parts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 BMW M6 Gran Coupe, 2018 BMW M6 Gran Coupe, 2017 BMW M6 Gran Coupe, 2016 BMW M6 Gran Coupe, and 2015 BMW M6 Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HOUSING WITH ADD-ON PARTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil-coolant heat exchanger to S65 transmission | GS7D36SG | M6 | 10 Nm | |
| 2AZ Holder, oil-coolant heat exchanger to S65 transmission | GS7D36SG | M6 | 8 Nm | |
| 3AZ Oil thermostat to transmission | GS7D36SG | M8x60 | 19 Nm | |
| 4AZ Hydraulic line to oil thermostat | GS7D36SG | M8 | 19 Nm | |
| 5AZ Transmission input speed sensor to transmission | GS7D36SG | M6 | 9 Nm | |
| 6AZ Instrument cluster sensor, oil pump, to transmission | GS7D36SG | M6 | 6 Nm | |
| 7AZ Oil pump spray plate to transmission | GS7D36SG | 10 Nm | ||
| 8AZ Oil pump to transmission | GS7D36SG | M6 | Position: 1, 2, 5, 6, 7, 8 to final torque. Position: 1 loosen and to final torque. |
10 Nm |
| 9AZ Oil pump pressure pipe to transmission | GS7D36SG | M8 | Position: 3 and 4 to final torque | 25 Nm |
| 10AZ Clutch support to transmission | GS7D36SG | 11 Nm | ||
| 11AZ Aluminium screws/bolts, earth cable to transmission | GS7D36SG | Jointing torque | 5 Nm | |
| 12AZ Suction jet pump to transmission | GS7D36SG | M8 | 6 Nm | |
| 13AZ Suction filter to transmission | GS7D36SG | M6 | Screw (1) Screw (2) |
5 Nm 8 Nm |
| 14AZ Output flange | GS7D36SG | Collar nut installed with screw locking Pretension Release Tighten down |
175 Nm 125 Nm |