34 51 Slip control system (DSC)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | Initial torque Final torque |
2±0, 5 Nm 4, 3+0, 5 Nm |
|
| 2AZ ICM control unit to body | F01/F02/F03/F06/F07/F07/F10/F11/F12/F18/F13/F25/F26 | Replace screws. | 8 Nm | |
| 3AZ Pulse sensor to swivel bearing/wheel carrier Pulse generator to swivel bearing in front of all-wheel drive vehicle |
F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6x16 | 8 Nm | |
| F01, F02, F04, F06, F07, F10, F11, F12 | M6x16 | Hexagon screw AF 10 Replace screw. |
12 Nm | |
| 4AZ Hydraulic control unit to holder | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | 19 Nm | |
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 | 27 Nm | ||
| 5AZ Holder, hydraulic control unit, to body | F01/F02/F03/F04/F06/F07/F10/F12/F13/F11/F18 | M6 | 8 Nm | |
| F25/F26 | M6 | 8 Nm | ||
| 6AZ Pulse sensor adapter to swivel bearing | F03 | M6 | 8 Nm |