34 11 Front Brake
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BRAKE
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Renew screws. | 16 Nm |
| 2AZ Caliper carrier to swivel bearing | F01, F02, F04, F06, F07, F10, F11, F12, F13, F18 | M12x1.5 | Renew screws. | 110 Nm |
| F03 | M14x1.5 | Replace screws. Attention: Observe 4 phase tightening! Release Jointing torque Angle of rotation |
150 Nm min.90 ° 150 Nm |
|
| 180°± 15° | ||||
| F25/F26 | M12x1.5 | Replace screws. Jointing torque Angle of rotation |
75 Nm 45°10° |
|
| 3AZ Guard plate to swivel bearing | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6 | Renew screws. | 12 Nm |
| 4AZ Guide bolt (brake caliper to caliper carrier) | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | SW9 | 55 Nm | |
| F07/F06/F10/F11/F12/F13/F18/F25/F26 | SW7 | 30-5 Nm | ||
| F25/F26 | SW8 | 28 Nm | ||
| 5AZ Brake caliper at swivel bearing | F06/F10/F12/F13/M models only | M12x1.5 | Hexagon nut | 95 Nm |
| 6AZ Stud bolt (for brake caliper) in wheel carrier | F06/F10/F12/F13, M models only | Clean the screw thread in the wheel carrier and renew the stud bolt. | 20 Nm |