51 11 Front bumper
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper to air duct, top | F01/F02/F03/F04/F06/F07/F10/F11/F18 | 4 Nm | ||
| 2AZ Deformation element, top or bottom, to vertical connection | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 3AZ Deformation element to engine support | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws Jointing torque Angle of rotation |
80 Nm 270 ° |
| 4AZ Support to deformation element | F01/F02/F03/F04/F06/F07/F10/F11/F18/F12/F13 | Replace screws and nuts | 27 Nm | |
| F25/F26 | M8 | 20 Nm | ||
| 5AZ Carrier to deformation element, bottom | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 6AZ Deformation element, bottom, to adapter plate, front axle carrier | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 7AZ V-support to deformation element, top | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 8AZ Car registration number to bumper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1 Nm | ||
| 9AZ Car registration number to bumper (thread repair) | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M5 | 4.5 Nm | |
| 10AZ Carrier, bottom, to deformation element, bottom | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 11.8 Nm | ||
| 11AZ Bumper to side wall | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 3 Nm | ||
| 12AZ Bumper to radiator air duct | F25/F26 | 5 Nm |