34 21 Rear brakes
TIGHTENING TORQUE SPECIFICATION - REAR BRAKES
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Replace screw. | 16 Nm |
| 2AZ Caliper carrier to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12x1.5 | Replace screws. | 110 Nm |
| F03 | M14x1.5 | Replace screws. Attention: Observe 4 phase tightening! Jointing torque Release Jointing torque Angle of rotation |
150 Nm min.90 ° 150 Nm 180°± 15° |
|
| F25/F26 | M12x1.5 | Replace screws. Jointing torque Angle of rotation |
75 Nm 45°10° |
|
| 3AZ Protective plate to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6 | Replace screws. | 12 Nm |
| 4AZ Guide screw (brake caliper to caliper carrier) | F01, F02, F03, F04, F07 | WAF 7 | 30-5 Nm | |
| 5AZ Guide screw (brake caliper to caliper carrier) | F06/F10/F12/F11/F13/F18/F25/F26 | WAF 13 | Replace screws. | 35 Nm |