23 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2016 BMW 335i xDrive, 2016 BMW 335i, 2015 BMW 335i xDrive, 2015 BMW 335i, and 2015 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| TRANSMISSION DESIGNATIONS, SEE 23... | |||||
| 1AZ | Transmission to engine (Aluminum screws/bolts are not magnetic). | Replace aluminum screws. Jointing torque and angle of rotation must be observed without fail. |
|||
| N55 | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° | ||||
| N55/N47/B47/N20/S55 | M8 | Steel screw | 19 Nm | ||
| N55/N47/B47/S55 | M12 | Steel screw | 66 Nm | ||
| N55 | M10 | Steel screw | 38 Nm | ||
| N20/S55 | M10 | Steel screw | 56 Nm | ||
| Steel screws with Torx head | I-transmission | M8 | 19 Nm | ||
| I-transmission | M10x40-8.8 | 38 Nm | |||
| I-transmission | M10x50-10.9 | 56 Nm | |||
| I-transmission | M12 | 66 Nm | |||
| 2AZ | Oil drain plug/oil filler plug | K transmission (without S55) | Hexagon socket | 40 Nm | |
| K transmission (only S55) | Hexagon socket | 43±4 Nm | |||
| I-transmission | Hexagon socket | 43±4 Nm | |||
| I-transmission | M12x1.5 | 25 Nm | |||
| I-transmission | M18x1.5 | Steel screw without seal | 45 Nm | ||
| 3AZ | Cover plate to transmission | I-transmission | 7.6 Nm | ||
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| TRANSMISSION DESIGNATIONS, SEE 23... | |||||
| 1AZ | Transmission to engine (Aluminum screws/bolts are not magnetic). | Replace aluminum screws/bolts. Jointing torque and angle of rotation must be observed without fail | |||
| N53/N55 | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° +20 ° | ||||
| M10X85 | Jointing torque | 20 Nm | |||
| Angle of rotation | 180°- 200 ° | ||||
| N53/N55 | M8 | Steel screw | 19 Nm | ||
| N53/N55 | M12 | Steel screw | 66 Nm | ||
| K transmission | M8 | Steel screw | 19 Nm | ||
| K transmission | M12 | Steel screw | 66 Nm | ||
| I-transmissionN13 | M10 | Steel screw | 38 Nm | ||
| I-transmissionN20 | M10 | Steel screw | 56 Nm | ||
| 2AZ | Oil drain plug/oil filler plug | H/G-transmission | M18x1.5 hexagon socket | 35 Nm | |
| H/I transmission | M12x1.5 | 25 Nm | |||
| I-transmission | M18x1.5 | Steel screw without seal | 45 Nm | ||
| K transmission | Hexagon socket | 40 Nm | |||