232010 - Puller AM

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW 320i xDrive, 2017 BMW 320i, and 2016 BMW 335i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (Rillex ball-bearing extractor 6206 E) 8 balls with plastic cage - to extract the grooved ball bearing of the transmission drive shaft

Consisting of:

0491541 Claw
NOTE: (Claw for Rillex 6206 E (8 units))

Fig 1: Identifying Puller AM (232010)
Courtesy of BMW OF NORTH AMERICA, INC.
0491542 Holding sleeve
NOTE: (Union sleeve)
0491543 Spindle
NOTE: (Pressure spindle)