231230 - Spindle Mechanical tool

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW 320i xDrive, 2017 BMW 320i, and 2016 BMW 335i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (spindle (2 pieces)) For pulling off the bearing inner race from the drive shaft in the front section of the transmission housing

Fig 1: Identifying Spindle Mechanical Tool (231230)

Courtesy of BMW OF NORTH AMERICA, INC.