63 14 120 Removing and installing/replacing rear reflector (on rear bumper trim)

Unclip reflector (1) from bumper trim (2) in area (3).

Pull reflector (1) out of guide and detach towards rear from bumper trim (2).

Fig 1: Identifying Bumper Trim And Reflector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) and guide (2) on rear reflector must not be damaged.

Fig 2: Identifying Rear Reflector Catches And Guide

Courtesy of BMW OF NORTH AMERICA, INC.