51 64 020 Removing and installing/replacing the top rear connection (connection of both wheel arches at front): Replacement

Modify SUSPENSION CROSS-BRACE ON LEFT AND RIGHT . (Not for M5/M6 model)

Release screws (1).

Tightening torque 51 61 4AZ .

Detach rear connection (2) from front connection (3).

Installation note: 

Guide lug secures rear connection (2) to front connection (3).

Fig 1: Identifying Front, Rear Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Only if replacing front connection (1): 

Modify clips (2).

Fig 2: Identifying Front/Rear Connection And Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.