32 41 285 Replacing level switch for Dynamic Drive fluid reservoir

Necessary preliminary tasks: 

• Remove front left SUSPENSION CROSS-BRACE .
• Remove INTAKE PORT FOR AIR FILTER HOUSING .

Release screws (1) and (2).

Remove washers.

Tightening torque 32 41 1AZ/ 2AZ

Remove fluid reservoir by pulling upwards.

Fig 1: Identifying Dynamic Drive Fluid Reservoir Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Turn level switch (2) through approx. 45° and remove towards bottom.

Fig 2: Removing Level Switch

Courtesy of BMW OF NORTH AMERICA, INC.