11 23 Vibration damper

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - VIBRATION DAMPER

		Type	Thread	Tightening specification	Measure
1AZ	Torsion damper to crankshaft IMPORTANT: Never allow engine to run without ribbed V-belt (risk of damage).	N47/N47S	M10x65	Replace screws
				1. Jointing torque	40 Nm
				2. Angle of rotation	120 °