11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug to oil sump of all-wheel drive vehicle. | N20/N26 | M12 x 1.5 | Replace the sealing ring. | 25 Nm |
| 2AZ | Oil drain plug to oil sump without all-wheel drive vehicle. | N20/N26 | M12 x 1.5 | Replace plastic screw. | 8 Nm |
| 3AZ | Oil sump (plastic) to crankcase lower section. | N20/N26 | M6 x 25 | Replace screws | 10 Nm |
| 4AZ | Oil sump (aluminum) to crankcase lower section (all-wheel drive vehicle). | N20/N26 | M6 x 25 M6 x 80 M6 x 120 | 10 Nm | |
| 6AZ | Transmission to oil sump. | N20/N26 | M8 x 50 8.8 | 22 Nm | |
| 7AZ | Oil level sensor to oil sump. | N20/N26 | M6 | 8 Nm | |
| 8AZ | Oil sump (plastic) to crankcase lower section. | N20/N26 | M6x119 | Replace screws | 12 Nm |