18 20 Exhaust system mounting (N47, D16/20 K/U/O/T 1)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST SYSTEM MOUNTING (N47, D16/20 K/U/O/T 1)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Diesel particle filter to holder | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M8 nut | 19 Nm | |
| 2AZ | Brace, top, to diesel particulate filter | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M8 | 19 Nm | |
| 3AZ | Diesel particulate filter holder to gearbox | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M8 | 19 Nm | |
| 4AZ | Rear silencer to body | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M8 | 19 Nm | |
| 5AZ | Diesel particulate filter holder on cylinder head | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M12 | 38 Nm | |
| 6AZ | Reinforcement plate to body | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M8 | 21 Nm | |
| 7AZ | Tension strut to compression strut | N47 D16 U 1/N47 D20 K 1/N47 D20 U 1/N47 D20 O 1/N47 D20 T 1 | M12 | Replace screws. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 8AZ | Holder of exhaust system to transmission | N47 D20 O 1 | M8 | 19 Nm | |