52 26 005 Removing and installing/replacing rear seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Unclip rear seat on left and right towards top.

Installation note:

Feed seat belt buckles (1) into recesses in rear seat.

Fig 1: Feeding Seat Belt Buckles Into Recesses In Rear Seat

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) from seat belt end fitting (2), center.

Tightening torque: 72 11 22AZ .

Feed out the end fitting from the rear seat.

Lift out rear seat.

Installation note:

End fitting is coded against incorrect assembly.

Fig 2: Seat Belt End Fitting And Screw

Courtesy of BMW OF NORTH AMERICA, INC.