65 50 057 Removing and installing/replacing Central Information Display (CID)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with NOTES on protection against electrostatic damage (ESD protection).

Necessary preliminary work:

Remove DECORATIVE STRIP ON DASHBOARD ON RIGHT

NOTE: During replacement of 6, 5" CID for vehicles with OE 606 (Navigation Business) and production date until 03/2015, before replacing CID VEHICLE PROGRAMMING/ENCODING must be carried out.
Procedure does not apply to vehicles with 6, 5" CID without OE 606 (Navigation Business).

Release screws (1).

Tightening torque 65 50 1AZ .

Remove CID (2) towards top.

Fig 1: Identifying CID Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection and disconnect.

Remove CID (1).

Fig 2: Identifying CID Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .

NOTE: During replacement of 6, 5" CID for vehicles without OE 606 (Navigation Business) with production date until 07/2013, Head Unit Basic must be programmed.