65 75 055 Removing and installation/replacing emergency power siren with tilt sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

REMOVE rear left wheel arch cover F32 only: .
Remove rear right wheel arch cover

Loosen the screws or clips (1) and lower the mounting plate completely (2).

Unlock and disconnect associated plug connection, remove complete mounting plate (2).

Fig 1: Identifying Lower Complete Mounting Plate And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove emergency power siren with tilt sensor (2) from mounting plate (3).

Fig 2: Identifying Mounting Plate, Tilt Sensor, Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .