65 77 755 Removing and installing (replacing) front passenger seat sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Note AIRBAG SAFETY REGULATIONS !
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Remove front seat. See 52 13 403 REPLACING SEAT COVER FOR FRONT PASSENGER SEAT (NORMAL/MANUAL) , 52 14 002 REMOVING AND INSTALLING FRONT SEAT (NORMAL/ELECTRIC) ON THE PASSENGER'S SIDE FROM LEFT OR RIGHT 52 14 403 REPLACING SEAT COVER FOR FRONT PASSENGER SEAT (NORMAL/ELECTRICAL) or 52 15 404 REPLACING SEAT COVER FOR FRONT PASSENGER SEAT (SPORT/MANUAL) .

Unlock connector housing (1 to 3) and pull out of connector housing (4) in direction of arrow.

Installation note:

Connectors are encoded against incorrect assembly.

Make sure installation sequence of connector housing (1 to 3) is correct.

Fig 1: Pulling Out Of Connector Housing

G10099065

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Identifying Front Seat Screw

G10099066

Courtesy of BMW OF NORTH AMERICA, INC.

Release latch mechanism (1) in marked area.

Remove sensor (2).

Installation note:

Make sure sensor (2) is correctly fitted.

Fig 3: Identifying Sensor And Latch Mechanism

G10099067

Courtesy of BMW OF NORTH AMERICA, INC.