65 77 750 Removing and installing (replacing) driver's seat sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Note AIRBAG SAFETY REGULATIONS
!
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Remove front seat . See 52 13 001 REMOVING AND INSTALLING FRONT SEAT, DRIVER'S SIDE (NORMAL/MANUAL) , 52 14 001 REMOVING AND INSTALLING LEFT OR RIGHT FRONT SEAT, DRIVER'S SIDE, (NORMAL/ELECTRIC) or 52 14 002 REMOVING AND INSTALLING FRONT SEAT (NORMAL/ELECTRIC) ON THE PASSENGER'S SIDE FROM LEFT OR RIGHT .
Unlock connector housing (1 to 3) and pull out of connector housing (4) in direction of arrow.
Installation note:
Connectors are encoded against incorrect assembly.
Make sure installation sequence of connector housing (1 to 3) is correct.
Release screw (1).
Release latch mechanism (1) in marked area.
Remove sensor (2).
Installation note:
Make sure sensor (2) is correctly fitted.