65 77 534 Removing and installing/replacing front right sensor (US version only)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT RIGHT WHEEL ARCH COVER

Version with auxiliary oil cooler

Partially remove auxiliary oil cooler

NOTE: Picture shows left side.

Fig 1: Removing Air Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Release expansion rivet (1).

Remove air duct (2) in direction of arrow.

Installation note:

Make sure air duct (2) is correctly fitted in recess (3).

NOTE: Picture shows left side.

Fig 2: Identifying Expansion Rivet And Air Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (3) and disconnect.

Release screw (2).

Tightening torque 65 77 2AZ .

Remove sensor (1).

Installation note:

Make sure sensor (1) is in correct installation position.