61 35 Control units (P L7)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONTROL UNITS (P L7)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Control unit for Car Access System | F2x/F3x/F8x | 3.3 Nm | ||
| 2AZ | Control unit for camera-based driver support systems (KAFAS) | F2x/F3x/F8x | 3.3 Nm | ||
| 3AZ | Central Gateway Module | F2x/F3x/F8x | 3.3 Nm | ||
| 4AZ | Rear electronic module to body | F2x/F3x/F8x | 3.3 Nm | ||
| 5AZ | Holder to FEM FEM to A-pillar | F2x/F3x/F8x | Screw | 1.7 Nm | |
| 6AZ | Battery charger module on body | F2x/F3x | M6 | 8 Nm | |
| 7AZ | Interior aerial to center console | F2x/F3x/F8x | Screw | 1.8 Nm | |
| 8AZ | Rear power distribution box to body Control unit holder to body | F2x/F3x/F8x | Plastic nut | 2.6 Nm | |
| 9AZ | Regulated differential lock control unit to holder Regulated differential lock ground connection to holder | F8x | M6 | 8.8 Nm | |