51 61 Reinforcement, body
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REINFORCEMENT, BODY
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Suspension cross brace to body | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10x25 | Renew screws | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Rear trailing link | F31/F34 | M10x20 | Replace screw | 50 Nm |
| M12x35 | Replace screw | 100 Nm | |||
| F36 | M10 | Replace screw | 56 Nm | ||
| M12 | Replace screw | ||||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Strut, front partition wall | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | 19 Nm | ||
| 4AZ | Front end strut to body | F23/F33 | 28 Nm | ||
| 5AZ | Diagonal strut to adapter plate | F33 | Jointing torque | 56 Nm | |
| Angle of rotation | 90 ° | ||||
| 6AZ | Torsion strut to front axle support | F33 | M10 | Renew screws | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 7AZ | Torsion strut to side member | F33 | M12 | Renew screws | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 8AZ | Rear tension strut to cross member of luggage compartment floor | F33 | Replace screw | 56 Nm | |
| 9AZ | Rear tension strut to support | F33 | 50 Nm | ||
| 10AZ | Rear tension strut to side member | F33 | Replace screw | ||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 11AZ | Carbon brace on lock support | F80/F82 | Replace screw | 28 Nm | |
| 12AZ | Carbon brace on strut brace | F80/F82 | Replace screw | 28 Nm | |
| 13AZ | Cross-brace to spring strut dome | F80/F82 | M8 | 28 Nm | |
| 14AZ | Cross-brace to side panel | F80/F82 | M10 | 34 Nm | |
| 15AZ | Cross-brace to bulkhead | F80/F82 | M10x25 | Replace screw | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 16AZ | Cross-brace extension/additional strut to cross-brace | F80/F82 | M8 | 28 Nm | |
| 17AZ | Cross-brace extension to body | F80/F82 | M10 | 56 Nm | |
| 18AZ | Additional strut to cross-brace extension | F80/F82 | M8 | 28 Nm | |
| 19AZ | Torsion strut to front adapter plate | F33 | M10 | Replace screw | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 20AZ | Torsion strut to body | F33 | M8 | 19 Nm | |
| 21AZ | Lower partition wall of units compartment to body | F20/F21 | M8x18 | 19 Nm | |