13 71 150 Removing clean air pipe (N47 D20 O 1 with SCR)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INTAKE SILENCER HOUSING .

Fig 1: Identifying Engine Ventilation Hose, Clean Air Pipe, Clip
Courtesy of BMW OF NORTH AMERICA, INC.

Press down locking hook and detach hose (1) for engine ventilation.

With the heating element installed, unlock connector from heating element and pull off.

Release screw (2).

Tightening torque 13 71 2AZ .

Unfasten clip (3) on turbocharger. Detach clean air pipe (4), maneuver it out and remove upwards.

Assemble engine.