61 21 Battery with terminal (P L7)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - BATTERY WITH TERMINAL (P L7)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Battery cable, positive terminal, battery cable, negative terminal, SBK, IBS (Screw connection from top) Cable shoe to high-current relay | F2x/F3x/F8x | M6 | 5 Nm | |
| 2AZ | Power distribution box, body | F2x/F3x/F8x | 2.6 Nm | ||
| 3AZ | Distribution box to battery | M6 | 8 Nm | ||
| 4AZ | Battery cable, positive terminal on distributor Positive terminal of battery cable to transfer terminal point Positive battery cable to jump start terminal point | F2x/F3x/F8x | M8 | 15 Nm | |
| 5AZ | Mounting, battery holder | F2x/F3x/F8x | nutM6 | 6 Nm | |
| M8 screw | 8 Nm | ||||
| 6AZ | Negative battery cable to body | F2x/F3x/F8x | M8 | 15 Nm | |
| 7AZ | Positive battery cable of sub floor to bolt of separation wall seal | F2x/F3x | M6 | 8 Nm | |