31 12 050 Removing and installing/replacing left or right trailing link

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT WHEEL .

Release screws (1).

Remove cover (2).

Fig 1: Identifying Temperature Sensor Cover And Screw

G10095349

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1), if necessary, grip at inner Torx socket.

Tightening torque 31 12 2AZ .

Installation note:

Replace self-locking nut.

Keep trailing link to swivel bearing connection clean and free from oil and grease.

Fig 2: Identifying Slacken Nut

G10095351

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 31 12 1AZ .

Remove tension strut.

Installation note:

Replace screw (1).

Tighten down screw connection in NORMAL POSITION .

Fig 3: Identifying Tension Strut Screw

G10095350

Courtesy of BMW OF NORTH AMERICA, INC.