51 71 373 Removing and installing/replacing trailing link on spring strut dome

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Driving without the trailing link is not permitted.
(risk of damage to the body).

Necessary preliminary tasks:

Remove COVER IN ENGINE COMPARTMENT on the left and right

Lever out covers (1) and release screws underneath.

Release screws (2) and remove trailing link (3).

Tightening torque 51 61 1AZ

Installation note:

Replace screws and tighten to specified torque and then to angle of rotation.

Fig 1: Identifying Trailing Link, Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.