61 61 100 Removing and installing/replacing both windscreen wiper arms

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 6 060

IMPORTANT: After installation check setting dimension and contact angle of the wiper arm. See CHECKING/ADJUSTING CONTACT ANGLE or CHECKING CONTACT ANGLE (SERIES P L7) .

Remove protective cap (1).

Release nut underneath.

Tightening torque 61 61 2AZ .

Fig 1: Removing Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of breakage!
Do not bend wiper arm when removing.

Detach windscreen wiper arm with special tool 61 6 060 .

Fig 2: Detaching Wiper Arm Using Special Tool (61 6 060)

Courtesy of BMW OF NORTH AMERICA, INC.