61 31 270 Replacing switch for reversing light

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The installation location of the switch for the reversing light can vary depending on the transmission variant.

Necessary preliminary tasks:

Remove REAR UNDERBODY PROTECTION if necessary

Version A:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque: 16 Nm

Fig 1: Identifying Plug Connection And Switch For Reversing Light (Version A)

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque: 16 Nm

Fig 2: Identifying Plug Connection And Switch For Reversing Light (Version B)

Courtesy of BMW OF NORTH AMERICA, INC.