11 28 020 Replacing tensioning device for alternator drive belt (N20, N26)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Necessary preliminary tasks:
- Remove DRIVE BELT .
Remove special tool 11 0 390 from the belt tensioner (1), if applicable a lock pin (2).
Loosen screws (3) on the belt tensioner.
Tightening torque: 11 28 1AZ .
Assemble engine.