11 61 085 Removing and installing/renewing adjuster (N47)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The adaptation values must be reset before the adjuster is replaced.
Necessary preliminary tasks:
- Reset adaptation value with diagnosis system.
- Remove ACOUSTIC COVER
Disconnect plug connection (1).
Release screws (3).
Detach adjuster (2).
Installation note:
Observe installation position at linkage.
Assemble engine.
.