Mounting engine on assembly stand (N47)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 2 300
00 2 320
11 8 770

IMPORTANT: Observe manufacturer's specifications.

Necessary preliminary tasks:

Remove engine.
Remove engine support arm on left and right.

Prepare special tool 00 2 300 together with the special tool 00 2 320 .

Fig 1: Special Tool (00 2 300 With 00 2 320)

Courtesy of BMW OF NORTH AMERICA, INC.

Secure special tool 11 8 770 on left to support on engine support arm with screws (1).

Fig 2: Special Tool (11 8 770) With Screws (Left)

Courtesy of BMW OF NORTH AMERICA, INC.

Secure special tool 11 8 770 on right to support on engine support arm with screws (1).

Fig 3: Special Tool (11 8 770) With Screws (Right)

Courtesy of BMW OF NORTH AMERICA, INC.