41 62 000 Removing And Installing Tailgate

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Read contents of BODY, GENERAL .

Necessary preliminary work:

Remove COVER FOR TOP REAR WINDOW FRAME .
Disconnect all plug and socket cable connections on tailgate.

NOTE: This work step must be carried out with a second person assisting.

Carry over the work step shown symmetrically to the other side of the vehicle.

Release screws (1).

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Tightening torque 41 62 1AZ .

Remove tailgate.

Installation note:

Install tailgate at screw locations on hinge.

If necessary, ADJUST TRUNK LID .