41 51... Removing And Installing Door

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Do not damage adjoining body components.

The graphics are schematic representations and are to be applied to the relevant vehicle type.

Open door.

Pull the lock (1) up and disconnect plug connection.

NOTE: Secure door against closing.

Release screw (1) on door stop.

Front door:

Tightening torque 51 21 3AZ .

Fig 1: Pulling Lock Upwards

Courtesy of BMW OF NORTH AMERICA, INC.

Rear door:

Tightening torque 51 22 3AZ .

Open door up to limit position.

Release screws between both hinge elements at top and bottom.

Front door:

Tightening torque 41 51 1AZ .

Rear door:

Tightening torque 41 52 1AZ .

Unhinge door by moving upwards and placing it on a suitable surface.

Installation note:

If necessary, adjust DOOR .

Fig 2: Locating Screws Between Both Hinge Elements At Top And Bottom

Courtesy of BMW OF NORTH AMERICA, INC.