41 61 000 Removing And Installing Engine Compartment Lid
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Danger of injury.
Use suitable tool to support bonnet in the fully opened position.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
Use suitable tool to support bonnet in the fully opened position.
Removal of the engine compartment lid must be carried out with the assistance of a second person.
IMPORTANT:
These instructions apply only to vehicles without active pedestrian protection
.
Observe separate procedure for vehicles with active pedestrian protection.
Observe separate procedure for vehicles with active pedestrian protection.
Read contents of BODY, GENERAL .
Release the lock (1) and detach the water hose (2).
Unfasten plug connection (3) and disconnect.
Unscrew nuts (1).
Remove engine compartment lid.
Installation note:
Install engine compartment lid at screw locations to on hinge.
Tightening torque 41 61 1AZ .
If necessary, adjust ENGINE COMPARTMENT LID .