LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 953 (Steering And Wheel Alignment - Repair -- F31) >> Pump And Oil Supply >> 32 41... Instructions for removing and installing ear clips

32 41... Instructions for removing and installing ear clips

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: The work steps are show on assorted components.
Ear clip must always be replaced.

To remove an ear clip, place special tool 32 1 260 at right angles to ear and cut ear open.

Fig 1: Removing Ear Clip Using Special Tool (32 1 260)
G09849255Courtesy of BMW OF NORTH AMERICA, INC.

The ear clip can be fitted not only axially but also radially after the hook fastener has been opened.

Fig 2: Identifying Ear Clip Hook Fastener
G09837917Courtesy of BMW OF NORTH AMERICA, INC.

Attach hook fastener and press ear together with special tool 32 1 260.

Fig 3: Pressing Ear Clip Using Special Tool (32 1 260)
G09849257Courtesy of BMW OF NORTH AMERICA, INC.

The diagonal cutting pliers of special tool 32 1 260 can be used in areas which are difficult to access.

Fig 4: Identifying Special Tool (32 1 260)
G09837919Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Gap (A) max. 1 mm!
Fig 5: Identifying Ear Clip Gap
G09849296Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals