31 60 Output shaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft console to engine oil sump | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 19 Nm | |
| 2AZ | Output shaft to wheel hub | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M16 | Observe instructions in Repair Manual. Replace collar bolt and spring. |
|
| Jointing torque | 210 Nm | ||||
| Angle of rotation | 90 ° | ||||