54 12 499 Replacing seal for glass slide/tilt sunroof frame
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove complete GLASS SLIDE/TILT SUNROOF (FRAME)
Detach seal (1) from slide/tilt sunroof (2).
Installation:
Groove of seal must point outwards.
Place seal gently in position and align limit points parallel to each other.
Press seal (1) firmly on frame (2) and ensure correct seating.