84 10 050 Removing and installing (replacing) USB hub

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks:

Remove TRIM PANEL FOR DOOR PILLAR, (BOTTOM) LEFT

Disconnect plug connection (1).

Release screws (2) and remove USB hub (3).

Fig 1: Identifying Plug Connection, USB Hub And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/ENCODING .