Light/dark boundary of headlights in headlight aimer

{e} Setting dimension, headlights: 

• Value is indicated on the headlight housing  and on the type plate  of the vehicle in %. (e.g.: 1.0 %  = -10 cm/10 m = - 1.0 %  on the headlight adjusting device)
• The value 1.0 %  (adjustment value - 1.0 %  ) applies to all BMW Group vehicles.
• Exception: E53, E70, E71, E72, E83, R60, R61. The value 1.1 % (adjustment value - 1.1 %  ) applies to these vehicles.

Setting dimension, fog lights: 

• The value 2.0 %  = -20 cm/10 m = - 2.0 %  on the headlight adjusting device applies to all BMW Group vehicles.

{H} Height of center of headlight above parking surface.

{h} {H} - {e} = height of marking line above parking surface

+ Central mark = center point of high beam headlight.

{M} Marker line of the headlight adjustment device

{S} Standing surface of the vehicle and headlight adjustment device

Adjustment dimension {e} is only valid for EUR. Observe differing national regulations.