72 12 006 Removing and installing/replacing airbag module for passenger's knee protection

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.

IMPORTANT: Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.

Necessary preliminary tasks:

Remove TRIM FOR INSTRUMENT PANEL , bottom right

Release screws (1).

Tightening torque 72 12 03AZ .

Feed airbag module (2) in direction of arrow out of instrument panel trim and remove.

Fig 1: Removing Instrument Panel Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure airbag module (1) is correctly seated in instrument panel trim.

Fig 2: Identifying Airbag Module And Instrument Panel Trim Installation Area

Courtesy of BMW OF NORTH AMERICA, INC.