After Installation note

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

If the hinge is slackened on the body side, the area of the hinge must be sealed in a u-shape with sealant (1).

Fig 1: Identifying Hinge Sealant Applying Area

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten all screws to specified torque.
Touch up unpainted surfaces in the appropriate color.
If necessary, adjust front door.