41 00... Welding Steel Components: Welding

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

During MAG welding, the weld gap must be kept as small as possible. The larger the weld gap, the lower will be the strength of the joint.
During spot-welding, the metal flanges to be joined must be placed as close together as possible without gaps.

The larger the gap, the lower will be the strength of the joint.

Minimum gap between welding spots 25 mm.