LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 479 (Collision - Body Panel Repair (F01, F02)) >> Body Repair General Information >> 41 00... Notes On Adhesive K2 >> Adhesive application

Adhesive application

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Read the vehicle-specific repair instructions to determine the thickness and positioning of the adhesive bead.

After applying the adhesive, check whether an adhesive component has emerged at the back of the glue cartridge. If yes, break off the bonding procedure. Clean new part. Use new glue cartridge. Contact national hotline.

Remove contamination caused by adhesive residue immediately.

Hardened adhesive can only be removed mechanically.

scientia non olet · About LEMON Manuals