MSA function is deactivated by

WARNING: This page is about a different car, the 2011 BMW 750xi and 2010 BMW 750xi. However, it is still accessible from the selected car via links, so may be relevant.

Deactivate MSA by means of button (1) in passenger compartment
Open seat belt buckle and driver's door

Fig 1: Identifying MSA Button
Courtesy of BMW OF NORTH AMERICA, INC.
Open engine bonnet/hood and ensure that engine hood/bonnet contact is not in workshop mode
- Workshop mode
  1. =10 mm
- Basic setting (engine hood/bonnet open)
  1. B = 7 mm
  To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.
  
  Fig 2: Identifying Engine Hood/Bonnet Position (Workshop Mode And Basic Setting)
  Courtesy of BMW OF NORTH AMERICA, INC.