37 14 515 Replacing front left or right ride-height sensor: Notes
WARNING: This page is about a different car, the 2011 BMW 750xi and 2010 BMW 750xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
Unfasten plug connection (1) and disconnect.
Release nut (2) and disconnect jointed rod.
Tightening torque 37 14 4AZ .
Release screw (3) and remove ride-height sensor (4).
Tightening torque 37 14 2AZ .