65 77 604 Replacing sensor mat (OC3 mat) for front passenger seat occupancy detector
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Version with OC3 mat up to version (build date) 08/09.
From version (build date) 09/09, see version with CIS MAT .
From version (build date) 09/09, see version with CIS MAT .
WARNING:
Note AIRBAG SAFETY REGULATIONS
!
Incorrect handling can activate the airbag and cause injury.
Incorrect handling can activate the airbag and cause injury.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
A faulty OC3 mat can only be removed in conjunction with the upholstery from the seat cover.
If OC3 mat or upholstery is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
A faulty OC3 mat can only be removed in conjunction with the upholstery from the seat cover.
If OC3 mat or upholstery is defective, both parts may only be replaced together.
After fitting seat cover, enable OC3 mat with BMW diagnosis system.
The operation for removing the OC3 mat in conjunction with the upholstery is described in:
- Removing seat cover for front passenger seat. See SEAT COVER (NORMAL/ELECTRIC SEAT) , SEAT COVER (SPORTS SEAT) , or SEAT COVER (COMFORT SEAT)
Enabling seat occupancy detector (OC3 mat):
- Connect BMW PROGRAMMING SYSTEM
- Encode airbag control unit
- Delete fault memory if necessary